Composite sinks are made from a mixture of at least two unlike materials, which make them less expensive than solid granite sinks. Many are made from quartz, granite and acrylic blends, which gives them an elegant look while however very durable. They are also oestrus resistant, hot pans will not mar the surface, and they are difficult to scratch. Nonetheless, it is possible to still chip composite sinks, and it tin be fixed yourself with a few materials.

  • Blended sinks are fabricated from a mixture of at to the lowest degree two different materials, which make them less expensive than solid granite sinks.
  • They are besides oestrus resistant, hot pans will not mar the surface, and they are difficult to scratch.

Apply a small corporeality of liquid dish soap on a soft, damp sponge. Lightly make clean the sink and rinse thoroughly with slightly warm water. Brand sure you remove all the debris. Thoroughly dry out the sink with a soft cloth.

Lightly sand the chipped area with 600-grit sand paper. Sand effectually the areas of the chip, so the epoxy blends in amend and will hold.

Stir the 2-function epoxy together with a spoon in a pocket-sized container.

Apply the epoxy to the affected surface area with a matchstick or soft brush. Thoroughly comprehend the area and make sure it is evenly applied.

Let the epoxy harden for well-nigh 30 minutes earlier you apply three or four more than layers with the aforementioned method. The epoxy should exist even with the surface of the sink.

  • Lightly sand the chipped expanse with 600-grit sand paper.
  • Permit the epoxy harden for nearly 30 minutes before you apply iii or 4 more layers with the same method.

Wait for the epoxy to harden for 24 hours before y'all use the sink. If yous use the sink too soon, the epoxy may need to be reapplied.

Do non clean the sink for one calendar week to make sure y'all do not damage the repaired area.